Satellite over Fiber System, 4 Satellites over 1 Optical Fiber
BPF-41 series Satellite over Fiber System for the transmission and distribution of the satellite signal of 4 Quattro LNBs over one optical cable core.
At a glance
Key data, as supplied by engineering- 4 Satellites + Terrestrial RF
- 16 SAT-IF polarizations, 1 Terrestrial RF
- Dual Power supply
- Active TERR input
- Designed for 19" 2RU Rack cabinet
- High isolation because of direct PCB type F connectors
- LNB on/off switch
- High isolation industrial PSU’s
- Signal transport with fiber optic SC/APC single mode to wall sockets
- Easy and compact installation
- Low-power usage thanks to a new generation smd components
- LNB supply feature 13V - 18V
- Quad- & Quattro- LNB compatible
- HQ Terrestrial broadcast output by sharp filters
Overview
Product description
BPF-41 series Satellite over Fiber System for the transmission and distribution of the satellite signal of 4 Quattro LNBs over one optical cable core. Professional design with redundant dual power supply, in a 19″ 2RU rack-mountable enclosure.
No regular service and maintenance are needed during operation.
Satellite (L-Band) over Fiber System, 4 Satellites over 1 Optical Fiber Transmitter: BPF-41, Receiver: BFR-41
The new BLANKOM L-Band Fiber Optical Link System consists of a BPF-41 transmitter unit and as many BFR-41 receiver units as needed.
The system is capable of transferring the satellite signals from 4 satellite dish antennas to the Headend, which may be located at a distance of several kilometers from the antenna location.
It’s also capable of distributing the satellite signal from a single dish to multiple sub headends. These can be horizontally distributed across a wide area, but also vertically distributed across a huge building.
Four polarizations of one LNB and a full 47-860 MHz band terrestrial RF signal are being transmitted over one optical fiber core.
The system is of a fully professional design and is capable of many years of operation without a regular maintenance need.
BLANKOM BPF-41 Satellite over Fiber System, 4 Satellites over 1 Fiber, Transmitter front
BPF-11 Transmitter features:
BLANKOM BFR-41 Satellite over Fiber System, 4 Satellites over 1 Fiber, Receiver unit
BFR-11 Receiver features
- For 4 SAT positions (+ terrestrial) via 1 CWDM
- Internal Amplifier and 35 dB Isolation
- Input Dividers (optical to electrical O/E) + compensation by the internal Amplifier
- Low-loss and high power via SC/APC connector
- Amplification adjustment: 0…20 (15) dB attenuator to optimize every SAT-polarization/band SAT-IF
- Integrated PSU for plug-and-play operation
Features & capabilities
Features
The fiber optic transmitter is for standard quattro LNB usage to deliver up to 4 SAT positions (+ terrestrial) via 1 CWDM.
The system can be used to transport the satellite signal of 4 satellite dish antennas to the Headend, which can be kilometers away from the antenna location.
It can also be used to distribute the satellite signal of 4 dishes to multiple sub headend locations. These can be horizontally distributed in a wide area, but also vertically distributed in a huge building.
4 polarizations of 4 LNBs and a full 47-860 MHz band terrestrial RF signal are being transported over one optical fiber core.
The system is of fully professional design for many years’ operation without regular maintenance need.
16 polarizations over a single fiber
- 4 Satellites (4x Quad Quattro L/C-band MDU LNB support)
- RF transported over a single fiber optic cable, available as 4dBm and 8dBm
- Up to 64 optical signals can be splitted
- Front panel: Gain adjustment for each input
- Voltage LED Indicators
- LNB voltage short circuit protection
- LNB voltage control enabled with on-off switch
- Automatic fan cooling system
- Isolated linear DFB laser CWDM standard wave operating range
- 47-870 MHz (Digital Terrestrial)
- 950-2150 MHz (SAT-IF) working bandwidth
- Built-in high linear AGC amplifier BPF 41-4 or 8 transmitter (standard)
- BPF 41-8 transmitter with internal tilt level adjustment (standard)
- Electromagnetic resistance
- High RF resistance against heavy thunderstorms
- Easy installation and application
- 4 Satellites (4x Quad/Quattro L/C-Band MDU LNB support)
- Isolated linear DFB laser CWDM
- SAT-IF (opt. with terr) in wavelength multiplex via 1 single fiber SC/APC: Available as 4dBm (BPF-41-4) or 8dBm (BPF-41-8)
- Front: AGC= Automatic Gain Control for every one of the 17 Inputs
- LNB supplying voltage with ON-OFF switch and short-Protection
- Inbuilt highly linear AGC Amplifier in BPF 41-8 Transmitter
- BPF 41-8 Transmitter with internal Slope-automatic (standard)
- 950-2150 MHz (SAT-IF) Bandwidth and 47-870 MHz (Digital Terrestrial)
- Voltage and operation-LED indicators and automatic fan cooling System
Front and rear panels
Front and Rear Panels
BLANKOM BPF-41 Satellite over Fiber System, 4 Satellites over 1 Fiber, Transmitter front
BLANKOM BFR-41 Satellite over Fiber System, 4 Satellites over 1 Fiber, Receiver unit rear
BLANKOM BFR-41 Satellite over Fiber System, 4 Satellites over 1 Fiber, Receiver unit
Application examples
Application Example
Application Example: Transmission of 4 satellite signals over 1 optical fiber and using a multiswitch with 32 subscriber (tuner) outputs for distribution
BLANKOM BFR-41 Satellite over Fiber System, 4 Satellites over 1 Fiber, Receiver Application Example
Technical specifications
Specifications are subject to change without prior noticeTechnical Specifications
Technical Data of the BPF-41 Transmitter:
| Input | 17 F-female connectors (16 IF+1RF) (75 Ohm) |
| Output | 1 SC/APC (Full Band) Optic connector |
| SAT Frequency Range | 950-2150 MHz |
| TERR Frequency Range | 47-870 MHz |
| SAT Gain | 23dB ± 2 |
| TERR Gain (DVB-C/DVB-T) | 15dB ± 1 |
| Gain Settings | 0…15dB (LCD-Keypad) |
| Optical Output Power | 4 mW (6dBm) (or 8mW version for longer distances) |
| Optical Wavelength Range | 1270…1570nm (CWDM) |
| Max. TERR Signal Input | 90 dB ±3 |
| Max. SAT Signal Input | 80 dB ±3 |
| Power Supply | 100-240 VAC 50W |
| Operating Temperature | -40+85°C |
| Dimensions | 480x285x90mm |
| Weight | 3700 g |
Specifications are subject to change without prior notice.
Ordering guide
Exact part numbers for the quotationOrdering guide
Downloads
Downloads, Links
Get a quote for the BPF-41/BFR-41
Tell us the source, the destination and the number of channels. We reply in writing with a configuration, part numbers and pricing — our engineers answer from the bench, so a written enquiry reaches the right person faster than a phone call.
